Mitsubishi Outlander: Petrol-powered vehicles without turbo

Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Maintenance / Engine oil / Selection of engine oil / Petrol-powered vehicles without turbo

► Select engine oil of the proper SAE viscosity number according to the atmospheric

► Select engine oil of the proper SAE viscosity number according to the atmospheric temperature.

SAE 0W-20, 0W-30, 5W-30 and 5W-40 engine oils can only be used if they meet ACEA A3/B3, A3/B4 or A5/B5 and API SM or higher specifications.

► Use engine oil conforming to the following classification: • API classification: “For service SM” or higher
• ILSAC certificated oil
• ACEA classification:
“For service A1/B1, A3/B3, A3/B4 or A5/B5”

Note

► Use of additives is not recommended since they may reduce the effectiveness of additives already included in the engine oil. It may result in failure of the mechanical assembly.

SEE MORE:

Front fog lamps (Type 2)

1. Remove the screw (A). 2. Pull the cover out in the direction of the arrow shown in the illustration. 3. Remove the screws (B) and pull the entire lamp unit out. Note ► When unfastening the screws, be careful not to mistakenly move the beam position adjustment screw (C). 4. P

Outside rear-view mirrors

To adjust the mirror position The outside rear-view mirrors can be operated when the ignition switch is in the “ON” or “ACC” position. WARNING: ● Do not attempt to adjust the rear-view mirrors while driving. This can be dangerous. Always adjust the mirrors before driving. ●

Mitsubishi Outlander: Petrol-powered vehicles without turbo

READ NEXT:

Petrol-powered vehicles with turbocharge

Diesel-powered vehicles

Engine coolant

SEE MORE:

Front fog lamps (Type 2)

Outside rear-view mirrors