Mitsubishi Outlander manuals

Mitsubishi Outlander: Operation of the Dead Lock System

In a vehicle that has a Dead Lock System, it is possible to set the Dead Lock System using the remote controller. (Refer to “Dead Lock System”.)

READ NEXT:

 Operation of the outside rear-view mirrors (Vehicles equipped with mirror retractor switch)

To fold Within 30 seconds of locking the doors and rear hatch using the LOCK switch (1), press the LOCK switch twice rapidly to fold the outside rear-view mirrors. To extend Within 30 seconds of

 Setting of door and rear hatch unlock function (vehicles equipped with the central door lock switch)

The door and rear hatch unlock function can be set to the following two conditions. Each time the door and rear hatch unlock function is set, a chime will sound to tell you the condition of the doo

 Procedure for replacing the remote control switch battery

1. Before replacing the battery, remove static electricity from your body by touching a metal grounded object. 2. Remove the screw (A) from the remote control switch. 3. With the MITSUBISHI mark

SEE MORE:

 Accessory socket

CAUTION: ● Be sure to use a “plug-in” type accessory operating at 12 V and at 120 W or less. When using more than one socket at the same time, make sure that the electrical accessories are 12 V accessories and that the total power consumption does not exceed 120 W. ● Long us

 Rear shelf panel

CAUTION • Do not place luggage or other items on the rear shelf panel. Any items on the rear shelf panel would obstruct your rearward view, and they could fly forward and cause injuries or other mishap in the event of hard braking. To install 1. Insert the concave portion (A) on the unders

© 2010-2025 Copyright www.mioutlander.com