Mitsubishi Outlander: Parking brake
To park the vehicle, first bring it to a complete stop, fully apply the parking brake lever sufficiently to hold the vehicle.
READ NEXT:
To apply the parking brake
1- Firmly depress and hold the brake pedal, then pull the lever up without pushing
the button at the end of hand grip.
Caution
► When you intend to apply the parking brake, firmly press t
To release the parking brake
1- Firmly depress and hold the brake pedal, then pull the lever up slightly.
2- Push the button at the end of hand grip.
3- Lower the lever fully.
Caution
► Before driving, be sure that t
Parking
To park the vehicle, fully engage the parking brake, and then move the gearshift
lever to 1st or “R” (Reverse) position for vehicles equipped with M/T, or set the
selector lever (CVT) or gears
SEE MORE:
To install
Align the tyre valve with the valve opening provided on the wheel cover.
Then tap around the outer edge of the wheel cover with your hand to secure it
in place.
NOTE
Full wheel covers have a symbol mark provided on the reverse side to show
the air valve location.
Before installing the whee
To deactivate
The set speed driving can be deactivated as follows: ► Press the “ON OFF” switch
(A). (Cruise control will be turned off.)
► Press the “CANCEL” switch (D).
► Depress the brake pedal.
The set speed driving is deactivated automatically in any of the following ways.
&#
© 2010-2026 Copyright www.mioutlander.com
