Mitsubishi Outlander: Radio control panel and display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / LW/MW/FM digital tuning radio with CD player / Radio control panel and display
1- PWR (On-Off) switch
2- AM/FM (FM/MW/LW selection) button
3- Memory select buttons
4- TUNE switch
5- SEEK (Up-seek) button
6- SEEK (Down-seek) button
7- FM (FM1/FM2/FM3) indicator
8- ST (Stereo) indicator
READ NEXT:
To listen to the radio
1. Press the PWR switch (1) or the AM/FM button (2) to turn ON the radio.
Press the PWR switch again to turn OFF the radio.
2. Press the AM/FM button (2) to select the desired band.
3. Turn the TUN
Radio data system (RDS)
1- PWR (On-Off) switch
2- AM/FM (FM/MW/LW selection) button
3- Memory select buttons
4- TP (Traffic program) button
5- PTY (Program type) button
6- TUNE switch
7- SEEK (Up-seek) button
8- S
CD control panel and display
1- AM/FM button
2- CD (CD mode changeover) button
3- PWR (On-Off) switch
4- PAGE (Title scroll) button
5- DISP (Display) button
6- RPT (Repeat) button
7- RDM (Random) button
8- (Fast-rever
SEE MORE:
To install
1. Make sure the tabs (A) of the back of the wheel cover are not broken and correctly
fitted on the rings (B). If in doubt, do not install the wheel cover and consult
your MITSUBISHI MOTORS Authorized Service Point.
2. Align the air valve (C) of the tyre with the notch (D) in the wheel cover.
Operating range of the keyless operation system
If you are carrying the keyless operation key, enter the operating range of the
keyless operation system, and press the driver’s or front passenger’s door lock/unlock
switch, the tailgate LOCK switch or the tailgate OPEN switch, the ID code for your
key is verified.
You can only lock and
© 2010-2025 Copyright www.mioutlander.com
