Mitsubishi Outlander: Radio control panel and display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / LW/MW/FM digital tuning radio with CD changer / Radio control panel and display
1- PWR (On-Off) switch
2- AM/FM (FM/MW/LW selection) button
3- Memory select buttons
4- TUNE switch
5- SEEK (Up-seek) button
6- SEEK (Down-seek) button
7- FM (FM1/FM2/FM3) indicator
8- ST (Stereo) indicator
READ NEXT:
To listen to the radio
1. Press the PWR switch (1) or the AM/FM button (2) to turn ON the radio.
Press the PWR switch again to turn OFF the radio.
2. Press the AM/FM button (2) to select the desired band.
3. Turn the TUN
To tune the radio
Automatic tuning
After pressing the SEEK button (5 or 6), a receivable station will be automatically
selected and reception of the station will begin.
Manual tuning
The frequency changes every ti
To enter frequencies into the memory
Manual setting
You can assign to the memory select buttons (3) a maximum of 18 stations in the
FM band (6 FM1, 6 FM2 and 6 FM3 stations) and 6 stations each in the MW and LW band.
(Stations alrea
SEE MORE:
Electronically controlled 4WDsystem
The electronically controlled 4WD system is a 4- wheel drive system that allows
one of three drive modes to be selected with a dial, in accordance with the driving
conditions.
The following drive modes are available.
4-wheel drive operation requires special driving skills.
Carefully read th
Welcome light
This function turns on the position and tail lamps for about 30 seconds after
the UNLOCK switch (A) on the remote control transmitter is pressed when the combination
headlamps and dipper switch is in the “OFF” or “AUTO” position (for vehicles equipped
with the automatic lamp control).
© 2010-2026 Copyright www.mioutlander.com
