Mitsubishi Outlander: Service precautions
Adequate care of your vehicle at regular intervals serves to preserve the value and appearance as long as possible.
Maintenance items as described in this owner’s manual can be performed by the owner.
We recommend you to have the periodic inspection and maintenance performed by a MITSUBISHI MOTORS Authorized Service Point or another specialist.
In the event a malfunction or other problem is discovered, we recommend you to have it checked and repaired. This section contains information on inspection maintenance procedures that you can do yourself. Follow the instructions and cautions for each of the various procedures.
Warning
► When checking or servicing the inside of the engine compartment, make sure
the engine is switched off and has had a chance to cool down.
► If it is necessary to do work in the engine compartment with the engine running,
be especially careful that your clothing, hair, etc., does not become caught by
the fan, drive belts, or other moving parts.
► The fan may turn on automatically even if the engine is not running; turn the
ignition switch to “LOCK” position and remove the key to ensure safety while you
work in the engine compartment.
► Do not smoke, cause sparks or allow open flames around fuel or battery. The fumes
are flammable.
► Be extremely cautious when working around the battery. It contains poisonous and
corrosive sulphuric acid.
► Do not get under your vehicle with just the body jack supporting it. Always use
automotive jack stands.
► Improper handling of components and materials used in the vehicle can endanger
your personal safety. We recommend you to consult a specialist for necessary information.
READ NEXT:
Catalytic converter
For ordinary use, there are no particular precautions except that of using unleaded
petrol.
The exhaust gas scavenging devices used with the catalytic converter are extremely
efficient for the re
To check and refill engine oil
1600 models
1800 models (petrol-powered vehicles)
1800 models (diesel-powered vehicles)
2000 models
The engine oil used has a significant effect on the engine’s performance, service
li
SEE MORE:
Licence plate lamps
1. Remove while pressing the lamp unit (A) to the left side.
2. Insert a minus screwdriver with the end covered with a cloth or other object
to press the hook (B) aside and remove the lens.
3. Remove the bulb by pulling it out.
4. To install the bulb, perform the removal steps in reverse.
Information screen (when the ignition switch or the operation mode is ON)
Each time you lightly press the multi-information meter switch, the display screen
switches in the following order.
1- Odometer (Type1)/Tripmeter
2- Odometer (Type1)/Tripmeter
3- Service reminder
4- Engine coolant temperature display (Type 1)
5- Driving range display (Type 1)
Ins
