Mitsubishi Outlander: To check and refill engine oil
1600 models
1800 models (petrol-powered vehicles)
1800 models (diesel-powered vehicles)
2000 models
The engine oil used has a significant effect on the engine’s performance, service life and startability.
Be sure to use oil of the recommended quality and appropriate viscosity.
All engines consume a certain amount of oil during normal operation. Therefore, it is important to check the oil level at regular intervals or before starting a long trip.
1. Park the car on a horizontal surface.
2. Switch off the engine.
3. Wait a few minutes.
4. Remove the dipstick and wipe it with a clean cloth.
5. Reinsert the dipstick as far as it goes.
6. Remove the dipstick and read the oil level, which should always be within
the range indicated.
7. If the oil level is below the specified limit, remove the cap located on the
cylinder head cover and add enough oil to raise the level to within the specified
range. Do not overfill to avoid engine damage. Be sure to use the specified engine
oil and do not mix various types of oil.
8. After adding oil, close the cap securely.
9. Confirm the oil level by repeating step 4 to 6.
Use only the recommended oils with an ACEA, API or JASO classification as specified in this manual.
Caution
► In diesel-powered vehicles, when burning away and removing soot accumulated
in the DPF, fuel can mix with the engine oil and an increase in the engine oil level
may occur. This does not indicate an abnormality.
However, if the engine oil level is at or over the “X” mark (B) on the engine oil
dipstick (A), change the engine oil.
Note
► On vehicles equipped with turbocharger, the engine oil consumption is greatly
influenced by payload, engine speed, etc. Depending on how you drive, it can reach
1.0 lit./1,000 km.
► The engine oil will deteriorate rapidly if the vehicle is subjected to severe
conditions, requiring earlier oil replacement.
Please refer to the maintenance schedule.
► For information on how to dispose of used engine oil, refer to page 05.
READ NEXT:
Petrol-powered vehicles without turbo
► Select engine oil of the proper SAE viscosity number according to the atmospheric
temperature.
SAE 0W-20, 0W-30, 5W-30 and 5W-40 engine oils can only be used if they meet ACEA
A3/B3, A3
Petrol-powered vehicles with turbocharge
► Select engine oil of the proper SAE viscosity number according to the atmospheric
temperature.
SAE 5W-30, 0W-30 and 0W-40 engine oil can only be used if it meets ACEA A3/B3,
A3/B4 or A5
SEE MORE:
Change of mode selection
The mode selection dial is operated according to the need.
Turn the dial and the air outlet will be changed.
Air flow indicator (A) is displayed in the multi centre display.
A: From front and side demister B: From centre and side ventilators C: From
under the instrument panel D: From un
Disconnection and connection
To disconnect the battery cable, stop the engine, first disconnect the negative
(-) terminal and then the positive (+) terminal.
When connecting the battery, first connect the positive (+) terminal and then
the negative (-) terminal.
Note
► For petrol-powered vehicles with turbocharger
