Mitsubishi Outlander: SRS warning lamp/display
Warning lamp
If there is an error in the system, the warning lamp will come on and the warning display will appear on the information screen in the multi-information display.
Under normal conditions, the warning lamp comes on when the ignition switch is turned to the “ON” position and goes off a few seconds later.
The warning lamp will also come on and remain on when the SRS airbags and the seat belt pretensioner system have been activated.
The warning lamp/display is used for both SRS airbag warnings and seat belt pretensioner system warnings.
Warning
► There may be a system error if the warning lamp/display appears as indicated.
In such cases, an SRS airbag or a seat belt pretensioner system may not function
properly in a collision. Have your vehicle checked by a MITSUBISHI MOTORS Authorized
Service Point.
• Even when the ignition switch is in the “ON” position, the warning lamp does not
come on or it remains on a few seconds later
• The warning lamp comes on while driving
• The warning display appears while driving
READ NEXT:
SRS servicing
Warning
► We recommend any maintenance performed on or near the components of the
SRS to be performed by a MITSUBISHI MOTORS Authorized Service Point.
Improper work on the SRS components or
Instruments
1- Tachometer ®
2- Multi-information display ®
Information screen display list ®
3- Speedometer (km or mph + km/h)
4- Daytime dipper button (meter illumination control) ®
SEE MORE:
Cup holder
CAUTION
• Do not drink beverages while driving.
This is distracting and could cause an accident.
For the front seat
The cup holders are located in front of the floor console box.
For the rear seat
In order to use the cup holder, allow the armrest (A) to drop down.
Changing the function settings (when the ignition switch or the operation
mode
is ON)
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into the “P” (PARK) position (CVT).
2. Lightly press the multi-information meter switch a few times to switch the
information scre
