Mitsubishi Outlander: Testing the system
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Dead Lock System / Testing the system
Open all of the door windows, then set the Dead Lock System. (Refer to “Setting the system”.) After setting the Dead Lock System, reach into the vehicle through a window and confirm that you cannot unlock the doors using the lock knobs.
Note
► If you need advice on how to set the Dead Lock System, please contact a MITSUBISHI MOTORS Authorized Service Point.
READ NEXT:
Child-protection rear doors
1- Lock
2- Unlock
Child protection helps prevent the rear doors from being opened accidentally
from the inside.
If the lever is set to the locked position, the rear door cannot be opened using
Rear hatch
Warning
► It is dangerous to drive with the rear hatch open since carbon monoxide
(CO) gas can enter the cabin. You cannot see or smell CO. It can cause unconsciousness
and even death.
&#
To lock or unlock from outside the vehicle
Vehicles equipped with the key cylinder
1- Lock
2- Unlock
SEE MORE:
Braking
All the parts of the brake system are critical to safety. Have the vehicle serviced
by an authorized MITSUBISHI dealer at regular intervals according to the service
booklet.
Brake system
(1) The service brake is divided into two brake circuits so that when one brake
circuit fails, the other
Steering wheel audio remote control switches
The remote control switch is located on the left side of the steering wheel.
It can be used when the ignition switch or the operation mode is in ON or ACC.
1- Volume up button
2- Volume down button
3- Power switch/Mode selector button
4- Seek up/Track up/Fast-forward button
5- Seek down/Trac
© 2010-2025 Copyright www.mioutlander.com
