Mitsubishi Outlander: To remove the spare tyre
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For emergencies / How to change a tyre / To remove the spare tyre
1. Lift up the board.
2. To remove the spare tyre, remove the installation clamp (A) by turning it anticlockwise.
Note
► Put the spare wheel under the vehicle body near the jack. This makes it safer if the jack slips out of position.
READ NEXT:
To change a tyre
1. On vehicles equipped with wheel covers, first remove the covers (refer to
“Wheel covers”). Then loosen the wheel nuts a quarter turn with the
wheel nut wrench. Do not remove the wheel nuts
Vehicle equipped with steel wheels
Tighten the wheel nuts (tapered nuts) until the tapered parts of the wheel nuts
make light contact with the seats of the wheel holes and the wheel is not loose.
With a spare wheel, tighten the whee
To store the flat tyre or spare wheel
1. Lift up the board.
2. To store the flat tyre or spare wheel, fit the installation clamp (A) by turning
it clockwise.
Note
► On vehicles equipped with a compact spare wheel, the clamp
SEE MORE:
Filling the fuel tank
Warning
► When handling fuel, comply with the safety regulations displayed by garages
and filling stations.
► Before removing the fuel cap, be sure to get rid of your body’s static electricity
by touching a metal part of the car or the fuel pump. Any static electricity on
your
Electrical system
Vehicles equipped with Auto Stop & Go (AS&G) system
Note
► For vehicles equipped with the Auto Stop & Go (AS&G) system, contact a MITSUBISHI
MOTORS Authorized Service Point when replacing the battery.
: Optional equipment
© 2010-2025 Copyright www.mioutlander.com
