Mitsubishi Outlander: Tools and jack
Storage
The tools and jack are stowed in the luggage compartment.
The storage location of the tools and jack should be remembered in case of an emergency.
1- Tools
2- Jack
Tools
1- Tool case
2- Wheel nut wrench
3- Jack bar
4- Towing hook
Jack
Before removing the jack, lift up the board.
To remove
Turn the shaft end (1) so that the jack retracts and detach it from fixing bracket (A).
To store
Turn the shaft end (2) by hand to expand the jack until it is secured firmly in position.
READ NEXT:
How to change a tyre
Before changing a tyre, first stop your vehicle in a safe, flat location.
1. Park the vehicle on level and stable ground, free of loose pebbles, etc.
2. Set the parking brake firmly.
3. On vehicles
Spare wheel information
Check the air pressure of the spare tyre frequently and make sure it is ready
for emergency use at any time.
Maintaining the spare wheel at the highest specified air pressure will ensure
that it
To remove the spare tyre
1. Lift up the board.
2. To remove the spare tyre, remove the installation clamp (A) by turning it anticlockwise.
Note
► Put the spare wheel under the vehicle body near the jack. This make
SEE MORE:
Cooling (Vehicles with air conditioning)
Set the mode selection dial to the “”
position.
Set the air selection switch (A) to the outside position and push the air conditioning
switch (B).
Adjust the temperature by turning the temperature control dial clockwise or anticlockwise.
Select the desired blower speed.
NOTE
If the o
Seat belts
To protect you and your passengers in the event of an accident, it is most important
that the seat belts are worn correctly while driving.
The front seat belts have a pretensioner system.
These belts are used the same way as a conventional seat belt.
Refer to “Seat belt pretensioner system an
© 2010-2026 Copyright www.mioutlander.com
