Mitsubishi Outlander: Twin Clutch SST control mode display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Twin Clutch SST (Sport Shift Transmission) / Twin Clutch SST control mode / Twin Clutch SST control mode display
When the ignition switch is turned to the “ON” position, the currently selected control mode is displayed on the multi-information display.
READ NEXT:
Manual shift
Using the gearshift lever (A) or the shift paddles (B), shifting can be performed
manually.
Shifting can be performed even while the accelerator pedal is depressed.
This allows the driver to enj
Shifting using the gearshift lever
Selecting manual shifting
While the vehicle is stopped or being driven, move the gearshift lever from the
“D” (DRIVE) position in the main shift gate towards the driver’s seat to select
man
Shifting using the shift paddles
Selecting manual shifting
While the vehicle is stopped or being driven with the gearshift lever in the
“D” (DRIVE) position, manual shifting can be selected by pulling one of the shift
paddle
SEE MORE:
Electronic immobilizer (Anti-theft starting system)
The electronic immobilizer has been designed to significantly reduce the possibility
of vehicle theft.
The purpose of the system is to immobilize the vehicle if an invalid start is
attempted. A valid start attempt can only be achieved (subject to certain conditions)
using a keyless operation
SRS warning lamp/display
Warning lamp
The warning lamp/display illuminates when there is a fault with the system. In
addition, the warning display will be displayed on the information screen in the
multi-information display.
Normally, when the ignition switch is turned to the “ON” position or the operation
mod
© 2010-2025 Copyright www.mioutlander.com
