Mitsubishi Outlander: Shifting using the shift paddles
Selecting manual shifting
While the vehicle is stopped or being driven with the gearshift lever in the “D” (DRIVE) position, manual shifting can be selected by pulling one of the shift paddles towards you.
Shifting up
Each time the + (SHIFT UP) shift paddle is pulled, the transmission shifts up 1 gear.
Shifting down
Each time the - (SHIFT DOWN) shift paddle is pulled, the transmission shifts down 1 gear.
Note
► After manual shifting is selected using the shift paddles, shifting up and down can also be performed using the gearshift lever.
Returning to “D” range operation
When the gearshift lever is in the “D” (DRIVE) position, pull the + (SHIFT UP) shift paddle towards you for 2 seconds or more to return to “D” range operation.
Note
► If manual shifting is selected using the shift paddles when the gearshift lever
is in the “D” (DRIVE) position, the transmission will automatically return to “D”
range operation before the vehicle stops.
► When the transmission returns to “D” range operation from manual shifting, it
may automatically shift up or down from the gear selected using manual shifting
depending on the vehicle speed or driving conditions.
► If manual shifting is selected using the shift paddles, “D” range operation will
again be selected by moving the gearshift lever from the “D” (DRIVE) position towards
the driver’s seat, then return it towards the front passenger’s seat.
READ NEXT:
Manual shift display
In manual shift, the currently selected gear is displayed on the multi-information
display.
Warning display
When the warning display or the
warning display appears on the information
screen in the multiinformation display while you are driving, take the following
measures.
When warning display is
Operation of the Twin Clutch SST
Caution
► Before selecting a position with the engine running and the vehicle stationary,
fully depress the brake pedal to prevent the vehicle from creeping.
The vehicle will begin to move
SEE MORE:
Useful voice commands
Help function
The Bluetooth® 2.0 interface is equipped with a help function.
If you say “Help” when the system is waiting for a voice command input, the system
will tell you a list of the commands that can be used under the circumstances.
Cancelling
There are two cancel functions.
If you
Change of the blower speed
Adjust the blower speed by turning the blower speed selection dial clockwise
or anticlockwise.
The blower speed will gradually increase as the dial is turned to the right.
Blower speed indicator (A) is displayed in the multi centre display.
