Mitsubishi Outlander: Manual shift display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Twin Clutch SST (Sport Shift Transmission) / Manual shift / Manual shift display
In manual shift, the currently selected gear is displayed on the multi-information display.
READ NEXT:
Warning display
When the warning display or the
warning display appears on the information
screen in the multiinformation display while you are driving, take the following
measures.
When warning display is
Operation of the Twin Clutch SST
Caution
► Before selecting a position with the engine running and the vehicle stationary,
fully depress the brake pedal to prevent the vehicle from creeping.
The vehicle will begin to move
Passing acceleration
To gain extra acceleration in “D” (DRIVE) position, push the accelerator to the
floor. The Twin Clutch SST will automatically downshift.
Note
► In manual shift, downshifts do not take p
SEE MORE:
To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.)
Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove
the wheel nuts yet.
2. Place the jack under one of the jacking points (A) shown in the illustration.
Use the jacking po
Luggage compartment
Vehicle with the tyre repair kit
1. Tools
2. Tyre repair kit*
3. Luggage hook
4. Jack
5. Tools
6. Luggage hook
7. Hook
8. Luggage hook
Vehicle with the spare tyre
1. Tools
2. Spare wheel
3. Luggage hook
4. Jack
5. Tools
6. Luggage hook
7. Hook
8. Luggage hook
© 2010-2025 Copyright www.mioutlander.com
