Mitsubishi Outlander manuals

Mitsubishi Outlander: Warning display

Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Twin Clutch SST (Sport Shift Transmission) / Warning display

When the warning display or the

When the warning display appears on the information warning display or the screen in the multiinformation display while you are driving, take the following warning display appears on the information screen in the multiinformation display while you are driving, take the following measures.

When showing warning display is showing

The temperature of the Twin Clutch SST fluid is high.

If this occurs, take one of the following measures.

► Reduce the vehicle speed.
► Stop the vehicle in a safe place, place the gearshift lever in the “P” (PARK) position, and then open the bonnet with the engine running to cool the engine.

After a while, check that the warning display has gone out. If the display goes out, the vehicle can be driven normally. If the warning display remains on or comes on frequently, have the vehicle checked by a MITSUBISHI MOTORS Authorized Service Point.

► If the warning display Caution

► If the is shown, such as when the vehicle does not accelerate while traveling even if the warning display is shown, such as when the vehicle does not accelerate while traveling even if the accelerator pedal is depressed, the vehicle may not be able to be driven normally.

For safety, pay attention to your surroundings when driving the vehicle.

► If the vehicle is continuously driven on hilly roads or in a sporty manner, Note

► If the vehicle is continuously driven on hilly roads or in a sporty manner, the vehicle may vibrate.
This vibration is to alert the driver that the Twin Clutch SST fluid temperature has risen.
It does not indicate a malfunction.
If this occurs, perform the same measures for when the the vehicle can be driven normally. warning appears. If the vibration stops, the vehicle can be driven normally.

If vehicle is driven with warning displayed warning displayed

If the vehicle continues to be driven after the of the Twin Clutch SST fluid continues to rise, the transmission protection control warning display appears, and the temperature of the Twin Clutch SST fluid continues to rise, the transmission protection control may operate and cause the transmission to function as if the gearshift lever was in the “N” (NEUTRAL) position.

(At this time, the vehicle can temporarily not be driven.)

If this occurs, take the following corrective measures: 1. Depress the brake pedal and stop the vehicle in a safe place.
2. Place the gearshift lever in the “P” (PARK) position, and then open the bonnet with the engine running to cool the engine.
3. After a while, check that the display has gone out, and then stop the engine if the warning display has gone out, and then stop the engine if the 4. If the engine can be restarted, the vehicle can be driven normally. warning display has gone out.
4. If the engine can be restarted, the vehicle can be driven normally.

If the warning display remains on or comes on frequently, have the vehicle checked by a MITSUBISHI MOTORS Authorized Service Point.

When showing warning display is showing

A safety device in the Twin Clutch SST has been activated due to a possible malfunction in the Twin Clutch SST or in the engine electronic control module.

If this occurs, perform the following procedure.

1. Park your vehicle in a safe place and stop the engine.
2. Restart the engine.

If the there is no abnormal condition. warning display goes out, there is no abnormal condition.

However, if the warning display remains on or comes on frequently, have the vehicle checked by a MITSUBISHI MOTORS Authorized Service Point as soon as possible.

► If the warning display Caution

► If the is shown, such as when the vehicle does not accelerate while traveling even if the warning display is shown, such as when the vehicle does not accelerate while traveling even if the accelerator pedal is depressed, the vehicle may not be able to be driven normally.

For safety, pay attention to your surroundings when driving the vehicle.

READ NEXT:

 Operation of the Twin Clutch SST

Caution ► Before selecting a position with the engine running and the vehicle stationary, fully depress the brake pedal to prevent the vehicle from creeping. The vehicle will begin to move

 Passing acceleration

To gain extra acceleration in “D” (DRIVE) position, push the accelerator to the floor. The Twin Clutch SST will automatically downshift. Note ► In manual shift, downshifts do not take p

 Uphill/downhill driving

DRIVING UPHILL The Twin Clutch SST may not upshift to a higher shift position if the computer determines the current speed cannot be maintained once a higher shift position is engaged. For smoot

SEE MORE:

 Side airbag system

The side airbags (A) are contained in the driver and front passenger seatbacks. The side airbag is designed to inflate only on the side of the vehicle that is impacted, even with no passenger in the front seat. The label shown here is attached to the seatbacks with a side airbag.

 Parking brake

To park the vehicle, first bring it to a complete stop, fully engage the parking brake and then move the gear shift lever to 1st (on an uphill) or Reverse (on a downhill) position, for vehicles with a manual transmission or set the selector lever to “P” (PARK) position on automatic trans

© 2010-2025 Copyright www.mioutlander.com