Mitsubishi Outlander: Using the key on the driver’s door
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Central door locks / Type 2 (Except for vehicles equipped with the central door lock switch) / Using the key on the driver’s door
Using the key on the driver’s door locks or unlocks all doors and rear hatch.
1- Lock
2- Unlock
READ NEXT:
Using the inside lock knob on the driver’s door
Using the inside lock knob on the driver’s door locks or unlocks all doors and
rear hatch.
1- Lock
2- Unlock
To unlock the doors and rear hatch
You can select the function to unlock the doors and rear hatch either using the
ignition switch position or using the selector lever position (CVT) or the gearshift
lever position (Twin Clutch SST
Dead Lock System
The Dead Lock System helps to prevent theft.
When the keyless entry system or the keyless operation function has been used
to lock all of the doors and rear hatch, the Dead Lock System makes it imp
SEE MORE:
Exterior and interior lamp operation
Operate the combination lamp switch to check that all lamps are functioning properly.
If the lamps do not illuminate, the probable cause is a blown fuse or defective
lamp bulb. Check the fuses first. If there is no blown fuse, check the lamp bulbs.
For information regarding the inspection and r
How to enter PTYs in the memory
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE/SEEK button (5 or 6) to tune the PTY to be entered in
the memory. 2. Press one of the memory select buttons (7) for about 2 seconds
or longer. The sound will be momentarily interrupted wh
© 2010-2026 Copyright www.mioutlander.com
