Mitsubishi Outlander windshield wiper deicer switch and indicator light

The wiper deicer switch, also referred to as the defroster switch, can be operated while the engine is running.

The deicer is designed to warm the windshield area around the wiper blades and help release a wiper that has become frozen to the glass.

When the switch is pushed, indicator light A illuminates and the wiper deicer begins operating. Depending on the outside temperature, the deicer can remain active for up to 10 minutes. After the preset operating period has elapsed, the system switches off automatically. To stop the deicer before the automatic shutoff, push the switch again; indicator light A will turn off.

CAUTION

  • When cleaning the inner surface of the window, be careful not to scratch or damage the electrical conductors located on the glass.

    READ NEXT:

     Headlight and turn signal switch

     Headlight switch

    Lighting  Type A  Type B Rotate the switch to the position, and the front parking lights, tail lights, license plate lights, and instrument panel illumination will turn o

     Turn signal switch

     Example Turn signal Move the lever upward or downward to indicate the intended turning direction. After the turn is completed, the Mitsubishi Outlander turn signals normally cancel au

    SEE MORE:

     System temporarily unavailable

    Condition A: The warning and steering assist functions of the LDP system are not designed to operate under the following conditions: When the turn signal is operated and the Mitsubishi Outlander changes lanes in the direction indicated by the signal. After the turn signal is switched off, the L

     Instrument panel

    This illustrated overview identifies the principal controls, displays, storage areas and convenience features arranged across the Mitsubishi Outlander instrument panel. The numbered references make it easier to locate frequently used equipment and connect each component with the corresponding op