Mitsubishi Outlander: Auto Stop & Go (AS&G) system
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Auto Stop & Go (AS&G) system
The Auto Stop & Go (AS&G) system automatically stops and restarts the engine without operating the ignition switch when the vehicle is stopped, such as at a traffic light or in a traffic jam, to reduce exhaust gases, increase fuel efficiency.
Caution
► If the vehicle will be stopped for a long time or if you will leave the vehicle unattended, turn the ignition switch to the “LOCK” position to stop the engine.
- Automatically stopping the engine
- Automatically restarting the engine
- To deactivate
- If the display/indicator blinks while driving
READ NEXT:
Automatically stopping the engine
The Auto Stop & Go (AS&G) system is automatically activated when the ignition
switch is turned to the “ON” position. You can deactivate the system by pressing
the “Auto Stop & Go
Automatically restarting the engine
Depress the clutch pedal while the gearshift lever is in the “N” (Neutral) position.
The “ ” display/indicator turns off and the engine restarts automatically.
Note
► If the engin
To deactivate
The Auto Stop & Go (AS&G) system is automatically activated when the ignition
switch is turned to the “ON” position. You can deactivate the system by pressing
the “Auto Stop & Go
SEE MORE:
Ignition switch
To prevent vehicle theft, only the emergency key with the preregistered keyless
operation key inserted can start the engine. (Electronic immobilizer function) Also
refer to “Starting and driving: Starting the engine” on pages 4-15, 4-16.
LOCK
The engine is stopped and the steering wheel
Full-time 4WD
Full-time 4WD vehicles are propelled by engine power distributed constantly and
appropriately to all 4 wheels.
Not only does this ensure better handling on dry, paved roads but also permits
better traction when driving on slippery, wet or snow-covered roads and when moving
out of mud.
These
© 2010-2026 Copyright www.mioutlander.com
