Mitsubishi Outlander: Engine specifications

READ NEXT:
NOTE:
● The results given do not express or imply any guarantee of the fuel consumption
of the particular vehicle.
The vehicle itself has not been tested and there are inevitably differenc
SEE MORE:
DTC P0876: High Clutch Pressure Switch System
DESCRIPTIONS OF MONITOR METHODS
With the solenoid failure not detected and with
4th to 6th gear driving, the switch OFF status
continues for 2 seconds. (The detection is
achieved twice during 1 driving cycle*1, and it
continues for 2 driving cycles
DTC C1035 Mutual monitoring of RR wheel speed sensor
CAUTION
If there is any problem in the CAN bus lines, an incorrect
DTC may be set. Prior to this diagnosis, diagnose
the CAN bus lines (Refer to GROUP 54C − CAN Bus
Line Diagnostic Flow).
Whenever ECU is replaced, ensure that the CAN b
© 2010-2026 Copyright www.mioutlander.com
