Mitsubishi Outlander: Tyres and wheels

Optional equipment.
READ NEXT:
NOTE:
● The results given do not express or imply any guarantee of the fuel consumption
of the particular vehicle.
The vehicle itself has not been tested and there are inevitably differenc
NOTE:
● Points requiring routine inspection or replenishment such as the engine oil,
washer fluid and brake/clutch fluid are marked white for easy identification.
SEE MORE:
General Information
The 2-piece, 3-joint type propeller shaft with a center
bearing is adopted.
It has the following features:
The DOJ, which is of less sliding resistance, is
used for the No.2 joint to reduce idling vibration.
An insulator is installed to the vehicle body joint of
the center
DISASSEMBLY AND ASSEMBLY
Side cover
D-ring
2-6 brake piston
D-ring
Spring retainer
Snap ring
Seal ring
Required special tools:
MB992196: Spring compressor
DISASSEMBLY
1. Remove the seal rings from the side cover.
CAUTION
Ensure that the special tool MB992196 is correctly set,
directly
© 2010-2026 Copyright www.mioutlander.com
