Mitsubishi Outlander: Ignition switch
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the keyless operation system, refer to “Keyless operation system: Ignition switch” on pages 1-11 and 1-18.
[Except for vehicles equipped with keyless operation system]
LOCK
The engine is stopped and the steering wheel locked. The key can only be inserted and removed in this position.
ACC
The engine is stopped, but the audio system and other electric devices can be operated.
ON
The engine is running, and all the vehicle’s electrical devices can be operated.
START
The starter motor operates. After the engine has started, release the key and it will automatically return to the “ON” position.
Note
► Your vehicle is equipped with an electronic immobilizer.
To start the engine, the ID code transmitted by the transponder inside the key must
match the code registered in the immobilizer computer.
Refer to “Electronic immobilizer (Antitheft starting system)”.
READ NEXT:
ACC power auto-cutout function
After about 30 minutes has elapsed with the ignition switch in the “ACC” position,
the function automatically cuts out the power for the audio system and other electric
devices that can be ope
To remove the key
For vehicles equipped with a M/T, when removing the key, push the key in at the
“ACC” position and keep it depressed until it is turned to the “LOCK” position,
and remove it.
For vehicl
Steering wheel lock
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system: Steering wheel loc
SEE MORE:
Driver’s and passenger’s front air bag system
The driver’s air bag is located under the padded cover in the middle of the steering
wheel. The front passenger air bag is contained in the instrument panel above the
glove box.
The driver air bag and the front passenger air bag are designed to inflate at
the same time even if the passeng
Stopping the engine
1. Bring the vehicle to a complete stop.
2. Fully engage the parking brake while depressing the brake pedal.
3. For vehicles equipped with M/T, turn the ignition switch to the “LOCK” position
to stop the engine, and then move the gearshift lever to the 1st (on a uphill) or
“R” (Reverse
