Mitsubishi Outlander: SCV (Speed Compensated Volume) function
SCV function is a feature that automatically adjusts the VOLUME, BASS, MID, and
TREBLE settings in accordance with the vehicle speed.
The SCV function can be turned ON and OFF. Refer to “Function setup mode”.
READ NEXT:
1- PWR (On-Off) switch
2- AM/FM (FM/MW/LW selection) button
3- Memory select buttons
4- TUNE switch
5- SEEK (Up-seek) button
6- SEEK (Down-seek) button
7- FM (FM1/FM2/FM3) indicator
8- ST (
1. Press the PWR switch (1) or the AM/FM button (2) to turn ON the radio.
Press the PWR switch again to turn OFF the radio.
2. Press the AM/FM button (2) to select the desired band.
3. Turn the TUN
1- PWR (On-Off) switch
2- AM/FM (FM/MW/LW selection) button
3- Memory select buttons
4- TP (Traffic program) button
5- PTY (Program type) button
6- TUNE switch
7- SEEK (Up-seek) button
8- S
SEE MORE:
● Check the belts for cuts, worn or frayed webbing and for cracked or deformed
metallic parts. Replace the belt assembly if defective.
● A dirty belt should be cleaned with neutral detergent in warm water. After
rinsing in water, let it dry in the shade.
Do not attempt to bleach or
Emergency key
The emergency key is built into the keyless operation key. If the keyless operation
function cannot be used, for example because the keyless operation key battery has
worn out or the vehicle battery is flat, you can lock and unlock the driver’s door
with the emergency key. To
© 2010-2025 Copyright www.mioutlander.com
