Mitsubishi Outlander manuals

Mitsubishi Outlander: Vanity mirror

The vanity mirrors are located on the back of the sun visor.

The vanity mirrors are located on the back of the sun visor.

READ NEXT:

 Accessory socket

CAUTION: ● Be sure to use a “plug-in” type accessory operating at 12 V and at 120 W or less. When using more than one socket at the same time, make sure that the electrical accessories

 Interior lamps

1- Luggage room lamp 2- Room lamp (rear). 3- Map & room lamps (front). 4- Foot lamps P. 8-58. NOTE: ● If you leave the lamps on without running the engine, you will run down the batt

 Storage spaces

CAUTION: ● Never leave lighters, canned carbonated beverage, and spectacles in the cabin when parking the vehicle in hot sunshine. The cabin will become extremely hot, so lighters and other

SEE MORE:

 Power Plant Mount

General Information For the power plant support, the inertial axis four-point mounting system is utilized, and the system has the following features. For the engine and transaxle mountings, the cylindrical liquid seal mountings are used. This reduces idling vibration and acceleration noise, and

 DTC B1B54, B1B55, B1B56, B1B70, B1B71, B1B72, B1B73, B1B75, B1B76, B1BA3, B1BA4, B1BA5, B1BAA, B1BC7, B1BCF

DTC B1B54: Seat Belt Buckle Switch (RH) Circuit (Ground Side) Shorted DTC B1B55: Seat Belt Buckle Switch (RH) Circuit (Power Supply Side) Shorted DTC B1B56: Seat Belt Buckle Switch (RH) Circuit Open CAUTION If DTC B1B54, B1B55 or B1B56 are set in the SRS-ECU, always diagnose the CAN main bus lines

© 2010-2024 Copyright www.mioutlander.com