Mitsubishi Outlander: Volume and tone control panel
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / LW/MW/FM digital tuning radio with CD changer / Volume and tone control panel
1- PWR (On-Off) switch
2- VOL (Volume control) knob
3- Display
4- SOUND (Sound control) switch
READ NEXT:
To adjust the volume
VOL (Volume control)
Turn the VOL knob (2) clockwise to increase the volume; anticlockwise to decrease
the volume.
To adjust the tone
Press the SOUND switch (4) to select: SUB PUNCH → TYPE → FIELD → BASS → MID →
TREBLE → FADER → BALANCE → audio control mode OFF.
Note
► The S
SCV (Speed Compensated Volume) function
SCV function is a feature that automatically adjusts the VOLUME, BASS, MID, and
TREBLE settings in accordance with the vehicle speed.
The SCV function can be turned ON and OFF. Refer to “Function
SEE MORE:
Adjustable seat belt anchor (front seats)
The seat belt anchor height can be adjusted.
Raise or lower the seat belt anchor (A) while pressing the lock knob (B).
WARNING
• When adjusting the seat belt anchor, set it at a position that is sufficiently
high so that the belt will make full contact with your shoulder but will not touch
Daytime dipper button (meter illumination control)
Each time you press this button, there is a sound and the brightness of the instruments
changes.
1- Brightness display
2- Rheostat illumination button
Note
► You can adjust to 8 different levels for when the tail lamps are illuminated
and 8 for when they are not.
► If the veh
© 2010-2025 Copyright www.mioutlander.com
