Mitsubishi Outlander: SCV (Speed Compensated Volume) function
SCV function is a feature that automatically adjusts the VOLUME, BASS, MID, and
TREBLE settings in accordance with the vehicle speed.
The SCV function can be turned ON and OFF. Refer to “Function setup mode”.
READ NEXT:
1- PWR (On-Off) switch
2- AM/FM (FM/MW/LW selection) button
3- Memory select buttons
4- TUNE switch
5- SEEK (Up-seek) button
6- SEEK (Down-seek) button
7- FM (FM1/FM2/FM3) indicator
8- ST (
1. Press the PWR switch (1) or the AM/FM button (2) to turn ON the radio.
Press the PWR switch again to turn OFF the radio.
2. Press the AM/FM button (2) to select the desired band.
3. Turn the TUN
Automatic tuning
After pressing the SEEK button (5 or 6), a receivable station will be automatically
selected and reception of the station will begin.
Manual tuning
The frequency changes every ti
SEE MORE:
Fuse block location
To prevent damage to the electrical system due to shortcircuiting or overloading,
each individual circuit is provided with a fuse.
There are fuse blocks in the passenger compartment and in the engine compartment.
Passenger compartment (LHD vehicles)
The fuse blocks in the p
The front airbags and driver’s knee airbag are designed to deploy when the vehicle
suffers a moderate- to-severe frontal impact. A typical condition is shown in the
illustration.
1- Head-on collision with a solid wall at a speed of approximately 25 km/h (16
mph) or higher
2- Moderate-to-
© 2010-2025 Copyright www.mioutlander.com
