Mitsubishi Outlander: Warning display
If an abnormal condition occurs in the system, the following display/indicator will turn on.
- ASC indicator
Warning display
Caution
► If the warning is displayed, the hill start assist will not operate. Start
off carefully.
► Park your vehicle in a safe place and stop the engine. Restart the engine and
check whether the display/indicator goes out, in which case the hill start assist
is again working normally.
If they remain displayed or reappear frequently, it is not necessary to stop the
vehicle immediately, but the vehicle should be inspected by a MITSUBISHI MOTORS
Authorized Service Point.
READ NEXT:
Emergency stop signal system
This is a device that reduces the possibility of rear end collisions by the rapid
and automatic blinking of the hazard warning lamps to alert vehicles approaching
from behind during sudden braking
Brake assist system
The brake assist system is a device assisting drivers who cannot depress the
brake pedal firmly when it is necessary to do so (such as in emergency stop situations)
and provides greater braking fo
Anti-lock brake system (ABS)
The anti-lock brake system (ABS) helps prevent the wheels from locking during
braking. This helps maintain vehicle drivability and steering wheel handling.
SEE MORE:
Cleaning the exterior of your vehicle
If the following is left on your vehicle, it may cause corrosion, discolouration
and stains, wash the vehicle as soon as possible.
● Seawater, road deicing products.
● Soot and dust, iron powder from factories, chemical substance (acids, alkalis,
coal-tar, etc.).
● Droppings
To turn from “ACC” to “LOCK”
1. [Vehicles equipped with M/T]
Push the emergency key in at the “ACC” position and keep it depressed until it is
turned to the “LOCK” position, and remove it.
[Vehicles equipped with CVT or Twin Clutch SST]
First, set the selector lever (CVT) or the gearshift lever (Twin Clutch SST) to
© 2010-2025 Copyright www.mioutlander.com
