Mitsubishi Outlander: Warning display list (when the ignition switch is “OFF”)
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Indication lamp, warning lamp, and information screen display list / Information screen display list / Warning display list (when the ignition switch is “OFF”)
READ NEXT:
Other interrupt displays (when the ignition switch is “ON”)
The operation status of each system is displayed on the information screen. Refer
to the appropriate page for the system for further details.
This informs you that a periodic inspection is due.
SEE MORE:
Water temperature gauge
The water temperature gauge indicates the engine coolant temperature when the
ignition switch is “ON”.
CAUTION
If the indication needle enters the overheating zone while the engine is
running, it indicates that the engine is possibly overheating. Immediately park
your vehicle in a safe
Starting the engine (Diesel-powered vehicles)
1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake.
3. Depress and hold the brake pedal. 4. Place the gearshift lever in the “N” (Neutral)
position. 5. Fully depress the clutch pedal. 6. Turn the ignition key to the
“ON” position. The diesel preheat indic
© 2010-2026 Copyright www.mioutlander.com
