Mitsubishi Outlander: Windscreen wipers
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Wiper and washer switch / Windscreen wipers
Note
► To ensure a clear rearward view, the rear window wiper will automatically perform several continuous operations if the gearshift lever or the selector lever is put in the “R” position while the windscreen wipers are operating.
Refer to “Rear window wiper and washer”.
READ NEXT:
Except for vehicles equipped with rain sensor
The windscreen wiper and washer can be operated with the ignition switch in the
“ON” or “ACC” position.
If the blades are frozen to the windscreen, do not operate the wipers until the
ice
Vehicles with rain sensor
The windscreen wipers can be operated with the ignition switch in the “ON” or
“ACC” position.
If the blades are frozen to the windscreen, do not operate the wipers until the
ice has melte
Windscreen washer
The windscreen washer can be operated with the ignition switch in the “ON” or
“ACC” position.
The washer fluid will be sprayed onto the windscreen by pulling the lever towards
you.
When
SEE MORE:
Odometer/Tripmeter
When the ignition switch is turned “ON”, the odometer display is given in the
lower display window (1). The upper display window (2) shows the tripmeter A and
tripmeter B distances in that sequence. It then shows the distance that was displayed
before the ignition switch was last turned
Changing the function settings (when the ignition switch or the operation
mode
is ON)
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into the “P” (PARK) position (CVT).
2. Lightly press the multi-information meter switch a few times to switch the
information scre
© 2010-2026 Copyright www.mioutlander.com
