Mitsubishi Outlander: Wiper and washer switch
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Wiper and washer switch
Caution
► If the washer is used in cold weather, the washer fluid sprayed against
the glass may freeze, which may hinder visibility.
Warm the glass with the defroster or rear window demister before using the washer.
READ NEXT:
Windscreen wipers
Note
► To ensure a clear rearward view, the rear window wiper will automatically perform
several continuous operations if the gearshift lever or the selector lever is put
in the “R” po
Except for vehicles equipped with rain sensor
The windscreen wiper and washer can be operated with the ignition switch in the
“ON” or “ACC” position.
If the blades are frozen to the windscreen, do not operate the wipers until the
ice
Vehicles with rain sensor
The windscreen wipers can be operated with the ignition switch in the “ON” or
“ACC” position.
If the blades are frozen to the windscreen, do not operate the wipers until the
ice has melte
SEE MORE:
Odometer/Tripmeter
When the ignition switch is turned “ON”, the odometer display is given in the
lower display window (1). The upper display window (2) shows the tripmeter A and
tripmeter B distances in that sequence. It then shows the distance that was displayed
before the ignition switch was last turned
Active stability control (ASC)
The Active Stability Control (ASC) takes overall control of the anti-lock brake
system (ABS), traction control function and stability control function to help maintain
the vehicle’s control and traction.
Please read this section in conjunction with the page on the ABS, traction control
func
© 2010-2025 Copyright www.mioutlander.com
