Mitsubishi Outlander: ACD (Active centre differential system) control mode display screen
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Multi-information display / ACD (Active centre differential system) control mode display screen
The ACD operation status is displayed.
Refer to “ACD control mode switch”.
READ NEXT:
Mark display screen (when the ignition switch is “ON”)
This is displayed when you press the multi- information meter switch and switch
the warning display screen.
This mark is also displayed if there is another warning other than the one displayed.
Active Stability Control (ASC) OFF display screen
This is displayed when the Active Stability Control (ASC) is turned off with
the ASC OFF switch.
If there is a fault with the ASC, the ASC OFF display is shown.
Refer to ““ASC OFF” switch
Information screen (when the ignition switch is “ON”)
Each time you lightly press the multi-information meter switch, the display screen
switches in the following order.
1- Odometer (Type 1)/Tripmeter
2- Odometer (Type 1)/Tripmeter
3- Service re
SEE MORE:
Headlamps (high/low beam, for vehicles with high intensity discharge headlamps)
Do not attempt to disassemble or repair headlamps, and do not attempt to replace
their bulbs.
Warning
► A high voltage is present in the power circuit and in the bulbs and bulb
terminals.
To avoid the risk of an electric shock, contact a MITSUBISHI MOTORS Authorized Service
Point whe
Aluminium wheels
1. Remove dirt using a sponge while sprinkling water on the wheel.
2. Use neutral detergent on any dirt that cannot be removed easily with water.
Rinse off the neutral detergent after washing the wheel.
3. Dry the wheel thoroughly using a chamois leather or a soft cloth.
Caution
► Do not
© 2010-2026 Copyright www.mioutlander.com
