Mitsubishi Outlander: Auto Stop & Go (AS&G) system
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / General information / Auto Stop & Go (AS&G) system
This paragraph summarizes the major items of the Auto Stop & Go (AS&G) system such as the characteristics, operating procedures, etc. For details, refer to “Auto Stop & Go (AS&G) system”.
The Auto Stop & Go (AS&G) system reduces the emission of exhaust gases and increases fuel efficiency.
The Auto Stop & Go (AS&G) system automatically stops and restarts the engine without the use of the ignition switch when the vehicle is stopped, such as at traffic lights or in a traffic jam.
READ NEXT:
Activation
The Auto Stop & Go (AS&G) system is automatically activated when the ignition
switch is turned to the “ON” position.
Deactivation
You can deactivate the system by pressing the “Auto Stop & Go (AS&G) OFF” switch.
Then the “ ” display/indicator will turn on.
Auto stop
1. Stop the vehicle.
2. Place the gearshift lever in the “N” (Neutral) position.
3. Release the clutch pedal.
4. The “ ” display/indicator will turn on and the engine will stop automatica
SEE MORE:
Doors
Operation from outside the vehicle
1- Insert or remove the key 2- Lock 3- Unlock
Operation from inside the vehicle
1- Lock 2- Unlock
Pull the inside door handle toward you to open the door.
When the inside door handle of the front door is pulled, the door can be opened
even if the door is
Adjustable load floor
Storage space can be increased by lifting down the board.
Caution
► The exhaust pipe remains hot for a while after stopping the engine, so be
sure not to touch it.
► Do not stand behind the exhaust pipe when loading and unloading luggage. The heat
from the exhaust could cause bur
© 2010-2026 Copyright www.mioutlander.com
