Mitsubishi Outlander: Deactivation
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / General information / Auto Stop & Go (AS&G) system / Deactivation
You can deactivate the system by pressing the “Auto Stop & Go (AS&G) OFF” switch. Then the “ ” display/indicator will turn on.
READ NEXT:
Auto stop
1. Stop the vehicle.
2. Place the gearshift lever in the “N” (Neutral) position.
3. Release the clutch pedal.
4. The “ ” display/indicator will turn on and the engine will stop automatica
Auto go
Depress the clutch pedal while the gearshift lever is in the “N” (Neutral) position.
The “ ” display/indicator turns off and the engine restarts automatically.
System characteristics
The principle of the Auto Stop & Go (AS&G) system is that it adapts to the vehicle’s
needs (i.e. energy supply). This means that in certain circumstances the engine
will not stop and in
SEE MORE:
Rear window demister switch
The rear window demister switch can be operated with the ignition switch in the
“ON” position.
Push the switch to turn on the rear window demister. To turn off the demister,
push the switch again. As your vehicle is equipped with the rear window demister
timer, it will be turned off aut
Front passenger seat belt warning lamp
The front passenger seat belt warning lamp is located on the instrument panel.
The lamp comes on when a person sits on the front passenger seat but does not
fasten the seat belt. It goes off when the seat belt is subsequently fastened.
Warning
► Do not install any accessory or sticker
© 2010-2026 Copyright www.mioutlander.com
