Mitsubishi Outlander: Activation
The Auto Stop & Go (AS&G) system is automatically activated when the ignition switch is turned to the “ON” position.
READ NEXT:
Deactivation
You can deactivate the system by pressing the “Auto Stop & Go (AS&G) OFF” switch.
Then the “ ” display/indicator will turn on.
Auto stop
1. Stop the vehicle.
2. Place the gearshift lever in the “N” (Neutral) position.
3. Release the clutch pedal.
4. The “ ” display/indicator will turn on and the engine will stop automatica
Auto go
Depress the clutch pedal while the gearshift lever is in the “N” (Neutral) position.
The “ ” display/indicator turns off and the engine restarts automatically.
SEE MORE:
Adjustable load floor
Storage space can be increased by lifting down the board.
Caution
► The exhaust pipe remains hot for a while after stopping the engine, so be
sure not to touch it.
► Do not stand behind the exhaust pipe when loading and unloading luggage. The heat
from the exhaust could cause bur
Passenger compartment fuse location table
Note
► Spare fuses are provided on the lid of the fuse block in the engine compartment.
Always use a fuse of the same capacity for replacement.
: Fusible link
► Some fuses may not be installed on your vehicle, depending on the vehicle model
or specifications.
► The
© 2010-2026 Copyright www.mioutlander.com
