Mitsubishi Outlander: Changing the reset mode for average fuel consumption and average speed
The mode conditions for the average fuel consumption and average speed display can be switched between “Auto reset” and “Manual reset”.
1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch is “ON”)”.
2. Lightly press the multi-information meter switch to select “AVG (average fuel consumption and average speed setting)”.
3. Press and hold the multi-information meter switch for about 2 seconds or more to switch in sequence from A or 1 (Auto reset mode) → M, 2 or P (Manual reset mode) → A or 1 (Auto reset mode).
The setting is changed to the selected mode condition.
Manual reset mode
► When the average fuel consumption and average speed are being displayed, if
you hold down the multi-information meter switch, the average fuel consumption and
average speed displayed at that time are reset.
► When the ignition switch is switched from “ACC” or “LOCK” to “ON”, the mode setting
is automatically switched from manual to auto.
Switching to auto occurs automatically. If switching to manual mode is done, however, the data from the last reset is displayed.
Auto reset mode
► When the average fuel consumption and average speed are being displayed, if
you hold down the multi-information meter switch, the average fuel consumption and
average speed displayed at that time are reset.
► If the ignition switch is at “ACC” or “LOCK” for about 4 hours or longer, the
average fuel consumption display and average speed display are automatically reset.
Note
► The memory of the auto reset mode or manual reset mode for the average speed
display is erased if the battery is disconnected.
► The initial (default) setting is “Auto reset mode”.
READ NEXT:
Changing the fuel consumption display unit
The display unit for fuel consumption can be switched.
The distance, speed, and amount units are also switched to match the selected
fuel consumption unit.
1. Press and hold the multi-information
Changing the temperature unit
The display unit for temperature can be switched.
1. Press and hold the multi-information meter switch for about 2 seconds or more
to switch from the setting mode screen to the menu screen. Refer t
Changing the display language
The language of the multi-information display can be switched.
1. Press and hold the multi-information meter switch for about 2 seconds or more
to switch from the setting mode screen to the menu sc
SEE MORE:
Sunshade
WARNING
• Never leave a child (or other person who might not be capable of safe operation
of the sunshade switch) in the vehicle alone.
• Before operating the sunshade, make sure that nothing can be trapped (head,
hand, finger, etc.).
• Do not bring your head, hand, finger, etc. near t
To lock or unlock with the key
1- Lock
2- Unlock
Note
► On vehicles equipped with the central door lock switch, when locking or unlocking
with the key, only the driver’s door will be locked or unlocked.
To lock or unlock all doors and the rear hatch, use the central door lock switch,
the keyless entry system or
