Mitsubishi Outlander: Combination headlamps and dipper switch
Mitsubishi ASX / Mitsubishi ASX Owner's Manual / Instruments and controls / Combination headlamps and dipper switch
- Headlamps
- Lamps (headlamps, fog lamp, etc.) auto-cutout function
- Lamp monitor buzzer
- Dipper (High/Low beam change)
- Headlamp flasher
- Welcome light
- Coming home light
READ NEXT:
Headlamps
NOTE
• When entering a country in which vehicles are driven on the opposite side of
the road to the country in which your vehicles is supplied, necessary measures have
to be taken to avoid daz
Lamps (headlamps, fog lamp, etc.) auto-cutout function
• If the following operation is performed while the lamp switch is in the
position, the lamps will automatically
go out when the driver’s door is opened.
[Except for vehicles equipped with ke
Lamp monitor buzzer
[When the engine was started using the key]
If the driver’s door is opened when the key is in the “LOCK” or “ACC” position
or removed from the ignition switch while the lamps are on, a bu
SEE MORE:
Lamps (headlamps, fog lamp, etc.) auto-cutout function
• If the following operation is performed while the lamp switch is in the
position, the lamps will automatically
go out when the driver’s door is opened.
[Except for vehicles equipped with keyless operation system]
The ignition switch is turned to the “LOCK” or “ACC” position, or t
Manual transmission
The shift pattern is shown on the gearshift lever knob. During start-up, fully
depress the clutch pedal and shift into 1st gear or “R” (Reverse) position.
Then gradually release the clutch pedal while depressing the accelerator pedal.
Caution
► Do not move the gearshift lever into
© 2010-2025 Copyright www.mioutlander.com
