Mitsubishi Outlander manuals

Mitsubishi Outlander: Possible driving speed

Avoid shifting down at high speed, as this may cause excessive engine speed (the tachometer needle into the red zone) and damage the engine.

Petrol-powered vehicles without MIVEC engine

Use 5 th gear whenever vehicle speed allows, for maximum fuel economy.

Use 5 th gear whenever vehicle speed allows, for maximum fuel economy.

Petrol-powered vehicles with MIVEC engine

Use 5 th gear whenever vehicle speed allows, for maximum fuel economy.

Use 5 th gear whenever vehicle speed allows, for maximum fuel economy.

Diesel-powered vehicles without MIVEC engine

Use 6 th gear whenever vehicle speed allows, for maximum fuel economy.

Use 6 th gear whenever vehicle speed allows, for maximum fuel economy.

Diesel-powered vehicles with MIVEC engine

Use 6 th gear whenever vehicle speed allows, for maximum fuel economy.

Use 6 th gear whenever vehicle speed allows, for maximum fuel economy.

READ NEXT:

 Automatic transmission INVECS-III Sports Mode 6CVT (Intelligent & Innovative Vehicle Electronic Control System III)

The INVECS-III uses optimization and adaptation functions to optimally match the gear ratio to driving and road conditions. The CVT is capable of changing the gear ratio automatically and steplessl

 Selector lever operation

The CVT selects an optimum gear ratio automatically, depending on the speed of the vehicle and the position of the accelerator pedal. The selector lever (A) has 2 gates; the main gate (B) and the m

 Selector lever position display

When the ignition switch is turned to the “ON” position, the position of the selector lever is indicated in the multi-information display.

SEE MORE:

 Auto Stop & Go (AS&G) system

This paragraph summarizes the major items of the Auto Stop & Go (AS&G) system such as the characteristics, operating procedures, etc. For details, refer to “Auto Stop & Go (AS&G) system”. The Auto Stop & Go (AS&G) system reduces the emission of exhaust gases and incr

 Chassis and underbody protection

Your vehicle’s underbody has been treated at the factory in order to protect it from rust and corrosion. Some areas have been injected with anti-corrosion agents and wax. The effectiveness of these measures, however, will be reduced by flying stones, road chemicals, etc., as the vehicle is d

© 2010-2026 Copyright www.mioutlander.com