Mitsubishi Outlander: Rear fog lamp switch
The rear fog lamp can be operated when the headlamps or front fog lamps (if so equipped) turn on.
An indication lamp in the instrument cluster comes on when the rear fog lamp is turned on.
[Vehicles without front fog lamps] Turn the knob once in the “ON” direction to turn on the rear fog lamp. To turn the rear fog lamp off, turn the knob once in the “OFF” direction. The knob will automatically return to its original position when you release it.
[Vehicles with front fog lamps]
Turn the knob once in the “ON” direction to turn on the front fog lamps. Turn the knob once more in the “ON” direction to turn on the rear fog lamp. To turn the rear fog lamp off, turn the knob once in the “OFF” direction. Turn the knob once more in the “OFF” direction to turn off the front fog lamps.
The knob will automatically return to its original position when you release it.
Note
► The rear fog lamp is automatically turned off when the headlamps or front fog
lamps (if so equipped) are turned off.
► To turn the rear fog lamp on again, turn the knob once in the “ON” direction after
turning on the headlamps. (Vehicles without front fog lamps)
► To turn the rear fog lamp on again, turn the knob twice in the “ON” direction
after turning on the headlamps. (Vehicles with front fog lamps)
► In case of vehicles with Daytime Running Lamp, the rear fog lamp can be operated
even if the lamp switch is set to the “OFF” position.
READ NEXT:
Wiper and washer switch
Caution
► If the washer is used in cold weather, the washer fluid sprayed against
the glass may freeze, which may hinder visibility.
Warm the glass with the defroster or rear window demiste
Windscreen wipers
Note
► To ensure a clear rearward view, the rear window wiper will automatically perform
several continuous operations if the gearshift lever or the selector lever is put
in the “R” po
Except for vehicles equipped with rain sensor
The windscreen wiper and washer can be operated with the ignition switch in the
“ON” or “ACC” position.
If the blades are frozen to the windscreen, do not operate the wipers until the
ice
SEE MORE:
To operate
To operate the system, move the gearshift lever or selector lever to the “R”
position while the ignition switch is in the “ON” position. When the reversing sensor
system is operated, the reversing sensor system operation indication lamp (A) will
turn on. To stop the operation, push the
Ignition switch
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system: Ignition switch” on pages 1-11 and 1-18.
[Except for vehicles equipped with keyless operation system]
LOCK
The
