Mitsubishi Outlander manuals

Mitsubishi Outlander: Towing

Caution

► Do not tow full-time 4WD vehicles with the front or rear wheels on the ground Caution

► Do not tow full-time 4WD vehicles with the front or rear wheels on the ground (Type A or Type B) as illustrated. This could result in damage to the vehicle’s driving system or the vehicle could jump at the carriage.
If you tow full-time 4WD vehicles, use Type C or Type D equipment.

READ NEXT:

 Jacking up 4-wheel drive vehicles

Warning ► Do not crank the engine while jacking up the vehicle. The tyre on the ground may turn and the vehicle may roll off the jack.

 ACD (Active centre differential system

The ACD is a system that improves acceleration performance and straight-ahead stability by regulating the differential limiting action and power drive distribution of the centre differential. Ca

 ACD control mode

Select the control mode from the following three types to suit the driving conditions.

SEE MORE:

 Ignition switch

To prevent vehicle theft, only the emergency key with the preregistered keyless operation key inserted can start the engine. (Electronic immobilizer function) Also refer to “Starting and driving: Starting the engine” on pages 4-15, 4-16. LOCK The engine is stopped and the steering wheel

 To listen to the radio

1- PWR (On-off) switch 2- VOL (Volume control) knob 3- U/M/L (UKW/MW/LW selection) button 4- Audio adjust button 5- AUDIO button 6- TUNE/SEEK (Down-step/Down-seek) button 7- TUNE/SEEK (Up-step/Up-seek) button 8- Memory select buttons 9- Frequency display window 10- Preset memory number displ

© 2010-2026 Copyright www.mioutlander.com