Mitsubishi Outlander: Chassis Electrical, Heater, Air Conditioning
Mitsubishi Outlander 2007-2013 Service Manual / Chassis Electrical, Heater, Air Conditioning
- Chassis Electrical
- Local Interconnect Network (LIN)
- Controller Area Network (CAN)
- Heater, Air Conditioning and Ventilation
- General Information, Specifications
- Manual A/C Diagnosis
- On-vehicle Service
- Heater Unit, Heater Core, Blower Assembly and Evaporator Unit
- Compressor Assembly
- Automatic Air Conditioning
READ NEXT:
Battery
GENERAL INFORMATION
The 80D26L battery has been adopted for 3.0L
engine.
The 75D23L battery has been adopted for 2.4L
engine.
ON-VEHICLE SERVICE
BATTERY CHECK
WARNING
Battery posts, terminals a
Ignition Switch
SPECIAL TOOLS
TROUBLESHOOTING
STANDARD FLOW OF DIAGNOSTIC TROUBLE SHOOTING
Refer to Group 00 − Contents of troubleshooting.
DIAGNOSIS FUNCTION
HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)
Requi
SEE MORE:
How to change a tyre
Before changing a tyre, first stop your vehicle in a safe, flat location.
1. Park the vehicle on level and stable ground, free of loose pebbles, etc..
2. Set the parking brake firmly.
3. Turn the ignition key to the “LOCK” position, move the gearshift lever to
the “R” (Reverse) position
DTC B1C33, B1C34, B1C35, B1C36, B1C38, B1C39, B1C3A, B1C3B
DTC B1C33: Driver's Lap Pre-tensioner (Squib) System (Shorted to Squib
Circuit Ground)
Driver's Lap pre-tensioner (Squib) Circuit
CAUTION
If DTC B1C33 is set in the SRS-ECU, always diagnose
the CAN main bus line.
CIRCUIT OPERATION
The SRS-ECU judges how severe a collision is by
detecting signals
© 2010-2025 Copyright www.mioutlander.com
